Personal approach, the latest gadgets and super fast delivery.

Floris.cc was founded in 2009 by Pieter Floris. A one-stop-shop for open source hardware electronics; distributing items from all leading companies in the world of DIY electronics like Sparkfun, Arduino, Adafruit, Pololu, Genuino, PJRC Teensy, OomloutSeeedStudio etc. 
We can get you any item from the suppliers mentioned above; if you can't find the items in the shop let us know, we will get it for you!
We offer well-engineered, quality products with warranty and support, no chinese rip off clones here :-) 

  • € 40,00 In Stock
    New

    The Hakko FX-901 is a cordless soldering iron that is both portable and practical and provides you with a means to easily solder on the go. Powered by four AA sized batteries, this soldering iron is capable of 60-120mins of use (depending on battery type) before replacing its power cells. The max temperature for this iron is also determined by the type of...

    € 40,00
    In Stock
  • € 23,50 Out of stock
    New

    The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that it adds support for Bluetooth low-energy (i.e BLE, BT4.0, Bluetooth Smart), and nearly 30 I/O pins. The ESP32’s power and versatility will...

    € 23,50
    Add to cart View
    Out of stock
  • € 16,50 In Stock
    New

    This sensor is a carrier/breakout board for ST’s VL53L0X laser-ranging sensor, which measures the range to a target object up to 2 m away. The VL53L0X uses time-of-flight measurements of infrared pulses for ranging, allowing it to give accurate results independent of the target’s color and surface. Distance measurements can be read through a digital I²C...

    € 16,50
    In Stock
  • € 47,50 In Stock
    New

    This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 12 V with an available output current of around 15 A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. The regulator features reverse voltage...

    € 47,50
    In Stock
  • € 47,50 In Stock
    New

    This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 5 V with an available output current of around 15 A. Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads. The regulator features reverse voltage...

    € 47,50
    In Stock
  • € 8,50 In Stock
    New

    This board is a simple carrier of Allegro’s ±25A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude up to 25 A and outputs a proportional analog voltage centered at Vcc/2...

    € 8,50
    In Stock
  • € 7,50 In Stock
    New

    circuit to make a tiny proximity sensor. This low-brightness version draws an average of 8 mA at 5 V and has a typical sensing range up to approximately 12 inches (30 cm).

    € 7,50
    In Stock
  • € 6,50 In Stock
    New

    The FS90R is a micro servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation, offering an inexpensive and easy way to get your small turret spinning or miniature robot moving Key specs at 6 V: 130 RPM (no-load), 21 oz-in (1.5 kg-cm), 9 g

    € 6,50
    In Stock
  • € 23,50 Out of stock

    The Genuino UNO R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer...

    € 23,50
    Add to cart View
    Out of stock
  • € 42,50 In Stock

    The Genuino Mega 2560 is a microcontroller board based on the ATmega2560. It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.

    € 42,50
    In Stock
  • € 35,00 In Stock

    The Genuino 101 is a learning and development board that delivers the performance and low-power consumption of the Intel® Curie module with the simplicity of Arduino at an entry-level price.

    € 35,00
    In Stock
  • € 49,00 In Stock
    Sale!

    The Zero is a simple and powerful 32-bit extension of the platform established by the UNO.

    € 49,00
    In Stock
  • € 84,00 In Stock

    The SparkFun Inventor's Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete 15 circuits that will teach you how to read sensors, display information on an LCD, drive motors, and more. You don't need any previous programming or electronics...

    € 84,00
    In Stock
  • € 72,50 In Stock

    Interested in making neat stuff with an Arduino but not sure where to start? This Arduino Experimentation kit includes all the pieces needed to complete 11 different circuits, along with a experimenter's guide booklet & breadboard layout sheets. Basically everything you need to be playing within minutes of its arrival. If you need more than what we...

    € 72,50
    In Stock
  • € 99,00 In Stock
    Sale!

    The SparkFun Inventor’s Kit for Photon is a great way to get started in the fresh IoT world and WiFi development.

    € 99,00
    In Stock
  • € 39,00 In Stock
    Sale!

    OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. 

    € 39,00
    In Stock