No products
Categories
- Arduino & Co
- micro:bit
- NeoPixel
- Parts
- SeeedStudio Grove
- Motors / Robotics
- Breadboard
- Breakout Boards
- Cable / wire / Connectors
- cases / storage
- EL Wire / Panels
- Power
- General Components
- IC
- Other Development boards
- Knobs, Buttons & Joysticks
- Shields
- RFID
- Wireless XBee / Bluetooth / Wifi
- Leds and Displays
- Sensors
- Headers
- Audio / Sound
- DIY Kits
- Photon
- Raspberry Pi
- Starter Kits
- Teensy
- Tools
- Wearables
- Projects
- • Services
- • Sale
- Sense/Stage
List of products by manufacturer Pololu
€ 1,25 In Stock0.1" (2.54mm) Crimp Connector Housing:...
These single-pin housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 25.
€ 1,25In Stock
€ 1,25 In Stock0.1" (2.54mm) Crimp Connector Housing:...
These two-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 25.
€ 1,25In Stock
€ 1,25 In Stock0.1" (2.54mm) Crimp Connector Housing:...
These three-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 25.
€ 1,25In Stock
€ 1,25 In Stock0.1" (2.54mm) Crimp Connector Housing:...
These four-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
€ 1,25In Stock
€ 1,25 In Stock0.1" (2.54mm) Crimp Connector Housing:...
These five-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
€ 1,25In Stock
€ 1,25 In Stock0.1" (2.54mm) Crimp Connector Housing:...
These six-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
€ 1,25In Stock
€ 27,50 In Stock30:1 Metal Gearmotor 37Dx52L mm
This 2.05" x 1.45" x 1.45" gearmotor is a powerful brushed DC motor with 30:1 metal gearbox intended for operation at 12 V. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft.
€ 27,50In Stock
€ 21,50 In Stock34:1 Metal Gearmotor 25Dx52L mm HP
This cylindrical, 2.05" x 0.98" x 0.98" gearmotor uses a brushed DC motor with extra-strong magnets and a 34.014:1 metal gearbox to deliver a lot of power in a relatively small package. These units have a 0.315"-long, 4 mm-diameter D-shaped output shaft.
€ 21,50In Stock
€ 18,00 In Stock35:1 Metal Gearmotor 15.5Dx30L mm
This metal gearmotor is a compact (1.16" x 0.61" x 0.61") brushed DC motor with an enclosed 35:1 metal gearbox. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.
€ 18,00In Stock
€ 17,50 In Stock35:1 Mini Metal Gearmotor
This gearmotor is a compact (1.50" x 0.59" x 0.47") brushed DC motor with 35:1 metal gearbox. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft that matches the micro metal gearmotor output shafts.Key specs at 6 V: 350 RPM and 70 mA free-run, 20 oz-in (1.4 kg-cm) and 1.5 A stall.
€ 17,50In Stock
€ 13,00 In Stock700:1 Sub-Micro Plastic Planetary...
This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 700:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.3 g (0.046 oz), making it a great actuator for miniature robots and very small mechanisms.Key specs at 6 V: 90 RPM and 45 mA free-run, 12 oz-in (0.9...
€ 13,00In Stock
€ 6,00 In StockA4988 Stepper Motor Driver Carrier
This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step).
€ 6,00In Stock
€ 6,50 In StockA4990 Dual Motor Driver Carrier
This compact breakout board makes it easy to use Allegro’s A4990 dual motor driver, which can control two bidirectional DC motors over a wide operating voltage range of 6 V to 32 V. It is capable of delivering a continuous 0.7 A to each motor channel, and onboard sense resistors enable the A4990 to limit the peak motor current to about 0.9 A per channel....
€ 6,50In Stock
€ 25,00 In StockAltIMU-10 v5 Gyro, Accelerometer, Compass,...
The Pololu AltIMU-10 v5 is an inertial measurement unit (IMU) and altimeter that features the same LSM6DS33 gyro and accelerometer and LIS3MDL magnetometer as the MinIMU-9 v5, and adds an LPS25H digital barometer. An I²C interface accesses ten independent pressure, rotation, acceleration, and magnetic measurements that can be used to calculate the...
€ 25,00In Stock
€ 34,00 In StockCrimping Tool: 0.08-0.5 mm² Capacity,...
This crimping tool can be used to crimp both male and female versions of our JST connector crimp pins, JR crimp pins, Futaba J crimp pins, and crimp pins for 0.1″ housings onto 20-28 AWG wires to make custom cables. The crimping die has a width of 4 mm, and the tool offers ratcheting action for increased consistency and ease of use.
€ 34,00In StockDagu Rover 5 Tracked Chassis
This tracked chassis from Dagu Electronics makes a great base for building a small, tank-like RC vehicle or autonomous robot. The chassis includes a battery holder and two DC motors, with an independent drive train for each tread, so all you need to add to make a complete robot is a robot controller and the sensors of your choosing. A unique mechanism...
€ 54,50In Stock
