Sensors There are 23 products.

per page
Showing 1 - 16 of 23 items
  • € 45,50 In Stock

    Want to start playing with sensors, but don’t know where to begin? This kit includes a variety of basic sensors for any beginner or experienced programmer. With everything included in this kit, you’ll be able to sense acceleration, force, vibration, Infrared light, ambient light, temperature, and more! These are some great basic sensors from varying...

    € 45,50
    In Stock
  • € 9,00 In Stock

    Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboard LEDs when the matching touch sensor fires to help you...

    € 9,00
    In Stock
  • € 9,00 In Stock

    Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touch pads.

    € 9,00
    In Stock
  • € 30,00 Out of stock

    Heart rate data can be really useful whether you're designing an exercise routine, studying your activity or anxiety levels or just want your shirt to blink with your heart beat. 

    € 30,00
    Add to cart View
    Out of stock
  • € 12,50 In Stock

    The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once.

    € 12,50
    In Stock
  • € 9,00 In Stock

    Fans of the BMP085/BMP180 will want to take a look at the new BMP183 - an SPI spin on the old familiar classic. This precision sensor from Bosch is the best low-cost sensing solution for measuring barometric pressure and temperature. Because pressure changes with altitude you can also use it as an altimeter!

    € 9,00
    In Stock
  • € 6,75 In Stock

    This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high sensitivity and fast response time. Sensor provides an analog resistive output based on alcohol concentration.

    € 6,75
    In Stock
  • € 6,75 In Stock

    This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO concentrations anywhere from 20 to 2000ppm.

    € 6,75
    In Stock
  • € 6,75 In Stock

    This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing  LPG (composed of mostly propane and butane) concentrations in the air. The MQ-6 can detect gas concentrations anywhere from 200 to 10000ppm.

    € 6,75
    In Stock
  • € 1,50 In Stock

    Simple breakout board for the MQ - 3, MQ - 4, MQ - 6 and MQ - 7 gas sensors.  All you need is VCC at 5V, GND, and a resistor to an ADC, that is it.

    € 1,50
    In Stock
  • € 8,50 In Stock

    This sensor is a device used to sense the level of liquid within a tank, it may actuate a pump, an indicator, an alarm, or other devices.

    € 8,50
    In Stock
  • € 15,50 In Stock

    Non-invasive current transformer, use this sensor clip to build  your own Personal Energy Monitor .

    € 15,50
    In Stock
  • € 5,50 In Stock

    This compact module packs three IR LED/phototransistor pairs onto a 1.25″ × 0.3″ board. The sensors are mounted on a 0.375″ pitch, making this array a great minimal sensing solution for a line-following robot. Each sensor provides a separate analog voltage output.

    € 5,50
    In Stock
  • € 11,00 In Stock

    This sensor module has 8 IR LED/phototransistor pairs mounted on a 0.375" pitch, making it a great detector for a line-following robot. Pairs of LEDs are arranged in series to halve current consumption, and a MOSFET allows the LEDs to be turned off for additional sensing or power-savings options. Each sensor provides a separate analog voltage output.

    € 11,00
    In Stock
  • € 41,00 In Stock

    The MyoWare Muscle Sensor from Advancer Technologies measures, filters, rectifies, and amplifies the electrical activity of a muscle and produces an analog output signal that can easily be read by a microcontroller, enabling novel, muscle-controlled interfaces for your projects.  Note: This product requires electrodes; these are not included, but they are...

    € 41,00
    In Stock
  • € 5,50 In Stock

    These electrodes are intended for use with the MyoWare Muscle Sensor from Advancer Technologies. This product is a pack of six electrodes.

    € 5,50
    In Stock
Showing 1 - 16 of 23 items