Adafruit There are 34 products.

per page
Showing 1 - 16 of 34 items
  • € 8,50 In Stock

    Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation.

    € 8,50
    In Stock
  • € 8,50 In Stock

    Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation.

    € 8,50
    In Stock
  • € 11,50 In Stock

    Trinket's got a big sister in town - the Pro Trinket 5V! Pro Trinket combines everything you love about Trinket with the familiarity of the common core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in, so delicious.

    € 11,50
    In Stock
  • € 11,50 In Stock

    Trinket's got a big sister in town - the Pro Trinket 3V! Pro Trinket combines everything you love about Trinket with the familiarity of the core Arduino chip, the ATmega328. It's like an Arduino Pro Mini with more pins and USB tossed in.

    € 11,50
    In Stock
  • € 18,00 In Stock
    Sale!

    We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a Pro Trinket 3V or 5V, but when size isn't as much of a concern, and a USB-serial converter is...

    € 18,00
    In Stock
  • € 5,75 In Stock

    If you have a Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2 or 3 boards together to make a charging system, this little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. 

    € 5,75
    In Stock
  • € 22,75 In Stock

    Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Feather 32u4 Basic Proto, it has a bunch of prototyping space built right in

    € 22,75
    In Stock
  • € 34,50 In Stock

    Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth LE with built in USB and battery charging. Its an Feather 32u4...

    € 34,50
    In Stock
  • € 18,50 In Stock

    Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266

    € 18,50
    In Stock
  • € 12,50 In Stock

    A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo FeatherWing, you can add 8 x 12-bit PWM outputs to your FeatherWing. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight!

    € 12,50
    In Stock
  • € 22,50 Out of stock

    A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motorx (or 1 stepper and 2 DC motors). 

    € 22,50
    Add to cart View
    Out of stock
  • € 6,00 In Stock

    This is the FeatherWing Proto - a prototyping add-on for all Feather boards This has a duplicate breakout for each pin on a Feather, as well as a bunch of plain grid proto holes. For GND and 3.3V, we give you a strip of connected pads, There's plenty of room for buttons, indicator LEDs, or anything for your portable project. The FeatherWing Proto makes an...

    € 6,00
    In Stock
  • € 34,00 In Stock

    Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

    € 34,00
    In Stock
  • € 17,50 In Stock

    A Feather board without ambition is a Feather board without FeatherWings! This is the NeoPixel FeatherWing, a 4x8 RGB LED Add-on For All Feather Boards! You can connect a FeatherWing on top or bottom of your Feather board and make your Feather board strut like a peacock at a rave.

    € 17,50
    In Stock
  • € 1,50 In Stock

    These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well Note: Comes with one 12-pin and one 16-pin header,...

    € 1,50
    In Stock
  • € 9,00 In Stock

    A Feather board without ambition is a Feather board without FeatherWings! This is the Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board.

    € 9,00
    In Stock
Showing 1 - 16 of 34 items

Adafruit has it's own microcontroller development boards named Metro and Feather. The feather is a complete line of boards you can use standalone or stack it with feather wings. You can power them with a lipo battery of micro usb. Flexible, portable and lightweight; that;s why they are called Feather :-)