List of products by manufacturer Adafruit

per page
Showing 1 - 16 of 231 items
  • € 22,00 In Stock

    This lovely little display breakout is the best way to add a small, colorful and bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available!

    € 22,00
    In Stock
  • € 27,50 In Stock

    This is a beefy switching supply, for when you need a lot of power! It can supply 12V DC up to 5 Amps, running from 110V or 220V power (the plug it comes with is for US/Canada/Japan + NL Plug but you can use any plug adapter for your country, or just replace the cable with a standard 'figure-8' cable)

    € 27,50
    In Stock
  • € 2,50 In Stock

    This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate 6V nominal. (If you want only 3V, we suggest sticking a crumpled piece of tin foil in one of the slots.) 20mm coin cells are popular as they are used in keychain lights, so they are easy...

    € 2,50
    In Stock
  • € 2,50 In Stock

    Turn a wall adapter into a mini power supply with this incredibly useful adapter. A high quality molded 2.1mm DC barrel jack is brought out to red (center positive) & black (ring negative) alligator clips. Works with just about every wall adapter, good for about 2 or 3 Amps of current and up to 24VDC.

    € 2,50
    In Stock
  • € 2,50 In Stock

    Turn any battery pack into a power supply with this incredibly useful adapter. A high quality molded 2.1mm DC barrel plug is brought out to red (center positive) & black (ring negative) alligator clips. 2.1mm is a near-standard for electronics, so with this adapter you can easy clip and connect packs and wires to a power jack. Good for about 2 or 3...

    € 2,50
    In Stock
  • € 6,50 In Stock

    This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as:2.4GHz Wi-Fi (802.11b/g/n) 2.4GHz XBee Bluetooth Other 2.4GHz transceivers  Antenna comes with the industry standard RP-SMA connector that is found on nearly all WiFi...

    € 6,50
    In Stock
  • € 4,50 In Stock

    Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is...

    € 4,50
    In Stock
  • € 2,50 In Stock

    These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 3 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable...

    € 2,50
    In Stock
  • € 45,00 In Stock

    Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! 480x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display, and double our 2.8" TFT. As a bonus, this display has a resistive touchscreen...

    € 45,00
    In Stock
  • € 6,50 In Stock

    When Bunnie showed up at Adafruit with the prototype for his Chibitronics Circuit Stickers we were all like "How on earth does that work?" and he was all like "Z-Axis tape - Its amazing!" And we agreed, so we decided to get some in our Materials section since its so cool.

    € 6,50
    In Stock
  • € 2,75 In Stock

    Three rows in a right angle header!? Yes! These chunks of 0.1" header has yet-another-row - handy for when you want to connect cables that come in sets of three, like perhaps sensors, or servos. These plug into any standard 0.1" spacing perf-boards or other PCBs

    € 2,75
    In Stock
  • € 5,00 In Stock

    Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V. 

    € 5,00
    In Stock
  • € 2,50 In Stock

    These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector. They are good for whenever you have 4 wires you want to be able to plug and unplug. We like the solid and compact nature of these connectors and the latch that keeps the cable from...

    € 2,50
    In Stock
  • € 5,50 In Stock

    This 5050 LED breakout PCB set will make your life much much easier and get you prototyping faster than ever. Solder your 5050 sized LED to either side and you're ready to rock on any solderless breadboard. Each item comes with ten PCBs and each PCB is identical. PCB is .8mm/.03" thick, with ~10mm/0.4" spacing between the two rows.

    € 5,50
    In Stock
  • € 9,00 In Stock

    Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers find that they need to perform level shifting/conversion to protect the 3.3V device from 5V. 

    € 9,00
    In Stock
  • € 12,50 In Stock

    A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo FeatherWing, you can add 8 x 12-bit PWM outputs to your FeatherWing. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight!

    € 12,50
    In Stock
Showing 1 - 16 of 231 items