Audio / Sound There are 21 products.

per page
Showing 1 - 16 of 21 items
  • € 5,00 In Stock

    This super small mono amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4-8 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.0V-5.5VDC. Since the amp is a class D, its very efficient (over 90% efficient when driving an 8Ω speaker at over half a Watt) - making it perfect for portable and...

    € 5,00
    In Stock
  • € 23,50 In Stock
    Sale!

    This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can also be used to record audio in both PCM (WAV) and compressed Ogg Vorbis.

    € 23,50
    In Stock
  • € 27,00 In Stock

    Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want to make a sound play whenever you press a button. What about something that has to be small and portable? 

    € 27,00
    In Stock
  • € 8,00 In Stock

    Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. 

    € 8,00
    In Stock
  • € 13,50 In Stock

    This incredibly small stereo amplifier is surprisingly powerful - able to deliver 2 x 3.7W channels into 3 ohm impedance speakers. Inside the miniature chip is a class D controller, able to run from 2.7V-5.5VDC. 

    € 13,50
    In Stock
  • € 12,50 In Stock

    The Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude. The 3 outputs are simultaneous and independent, so you can use as many or as few as you want at once.

    € 12,50
    In Stock
  • € 20,00 In Stock

    Surface transducers give you the awesome power to turn almost any surface into a speaker.

    € 20,00
    In Stock
  • € 4,00 In Stock

    Make some noise with your next project! This small speaker is ideal for radio and amplifier projects and is even small enough to fit in most robot projects.

    € 4,00
    In Stock
  • € 11,50 In Stock

    Surface transducers give you the awesome power to turn almost any surface into a speaker. 

    € 11,50
    In Stock
  • € 1,50 In Stock

    This is a small 14mm round buzzer that operates around the audible 2kHz range. Use buzzers to create simple music or user interfaces.

    € 1,50
    In Stock
  • € 9,00 In Stock

    Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use the Maxim MAX9814, a specialty chip that is designed for amplifying electret microphones in situations where the loudness of the audio isn't...

    € 9,00
    In Stock
  • € 39,00 In Stock

    The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system for your car or remote control your media center. With this breakout board we've made it easy for you to drop it into any project you could use it for. All pertinent headers are broken out and labeled for your convenience. 

    € 39,00
    In Stock
  • € 6,00 In Stock

    The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted by the potentiometer.

    € 6,00
    In Stock
  • € 23,50 In Stock

    Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Or maybe you don't even know how to use microcontrollers, you just want to make a sound play whenever you press a button. What about something that has to be small and portable? You are probably feeling a little frustrated: it's been very hard to find a simple, low...

    € 23,50
    In Stock
  • € 16,00 In Stock

    Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an official HAT, so we called it a bonnet, you see?) It's the exact same size as a Raspberry Pi Zero but works with any and all Raspberry Pi computers with a 2x20 connector - A+, B+, Zero, Pi 2, Pi 3, etc. We've...

    € 16,00
    In Stock
  • € 24,50 In Stock

    Bend all audio files to your will with the Adafruit Music Maker FeatherWing! It's a fun-size version of our Music Maker shield for Arduino! This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). You can do all sorts of...

    € 24,50
    In Stock
Showing 1 - 16 of 21 items