No products
Categories
- Arduino & Co
- micro:bit
- NeoPixel
- Parts
- SeeedStudio Grove
- Motors / Robotics
- Breadboard
- Breakout Boards
- Cable / wire / Connectors
- cases / storage
- EL Wire / Panels
- Power
- General Components
- IC
- Other Development boards
- Knobs, Buttons & Joysticks
- Shields
- RFID
- Wireless XBee / Bluetooth / Wifi
- Leds and Displays
- Sensors
- Headers
- Audio / Sound
- DIY Kits
- Photon
- Raspberry Pi
- Starter Kits
- Teensy
- Tools
- Wearables
- Projects
- • Services
- • Sale
- Sense/Stage
List of products by manufacturer Other
€ 4,75 In Stock
€ 1,50 In Stock40 pins breakable header machine socket
Machined Pin Header, Female 40 pos. machine socket
€ 1,50In Stock
€ 3,50 In Stock5 x Photo resistor
5 light sensitive resistors Includes: 5 x photo resistor 5 x 10k Ohm resistor
€ 3,50In Stock
€ 14,50 In Stock5V Power Supply 2.5A
Switching Power Supply 5V 2.5A, including 8 different plugs (also USB!)
€ 14,50In Stock
€ 0,75 In Stock
€ 51,00 In Stock
€ 50,00 In Stock
€ 5,00 In StockBreadboard wire bundle
65 flexible wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white.
€ 5,00In Stock
€ 1,50 In StockBuzzer
This is a small 14mm round buzzer that operates around the audible 2kHz range. Use buzzers to create simple music or user interfaces.
€ 1,50In Stock
€ 2,00 In StockDarlington Driver 8-Channel ULN2803 DIP
8 Darlington Arrays in 18-Pin DIP Package part # ULN2803A. Perfect for running relays and high-power devices up to 500mA and up to 50V! Resources: Nuts and Volts article on Driving High Current Loads
€ 2,00In Stock
€ 0,25 In StockDiode Rectifier - 1A 50V
This is a simple, very common rectifier diode. Often used for reverse voltage protection, the 1N4001 is a staple for many power, DC to DC step up, and breadboard projects. 1N4001 is rated for up to 1A/50V.
€ 0,25In Stock
€ 6,00 In StockHalf size breadboard - Self-Adhesive
this is really just a regular, solderless breadboard. It has 2 power buses, 30 columns, and 10 rows - a total of 400 tie in points. All pins are spaced by a standard 0.1". The two sets of five rows are separated by about 0.3", perfect for straddling a DIP package over. The board accepts wire sizes in the range of 29-20AWG.
€ 6,00In Stock
€ 1,00 In Stock
€ 6,00 In Stock
€ 1,00 In Stock
